Sharing of Endoscope Leak Test Parameters – Air Leak Test Machine – Hirays

The medical endoscope is a tube equipped with light, which enters the human body through a natural orifice or a small incision made by surgery; Some endoscopes even have micro integrated circuit sensors to feed back the observed information to the computer.

In order to ensure the normal use of the endoscope, it is necessary to do the process of air tightness test and strictly enforce the sealing performance of the endoscope.

Today we are going to talk about the case of air leak test of endoscope.

Testing instrument: HC classic series air leak tester

Test method: customize the fixture and tooling according to the structure of the endoscope and customer needs.

Use the test type of Seald component and volume, put the product to be tested into the mold, press the start key of the tooling, and start the test. Fillpress: 200Kpa; Filling time: 8s; stable time: 10s; testing time: 5s; LeakMax: 30pa. During the test, if the leak value exceeds the set value, it means that the product to be tested is defective, otherwise it is qualified.

Advantages of Hirays’ air leak tester machine:

1.        The patented technology "IVT pneumatic seal valve terminal" independently developed by Hirays, had greatly improves the accuracy.

2.        Advanced differential pressure software algorithm, with a minimum resolution of 0.1Pa.

3.        There are 100 sets of subprograms, each group of subprograms can be programmed separately.

4.        Full touch and large screen intelligent operating system, simple and clear operation interface.

5.        The standard volume identification function can automatically identify the volume of the sample to be tested.

6.        The quick inflation function is optional.

Profit of Hirays’ air leak tester machine:

   l  High precision, ensuring the stability of the mold;

   l  High resolution, even the smallest leakage can be accurately detected ;

l  All the requirements of air leak testing can be packaged and purchased in Hirays to reduce the total cost of ownership;

l  Experienced engineers bring sophisticated mold design, so that each mold you use is stable and reliable ;

l  Strict requirements, bring a stable detection system to help you select defective products ;