National Service Hotline:
Location:Home page > News > Industry >
Waterproof test of communication base station

Waterproof test of communication base station. Use Harris air tightness tester to test and identify the waterproof of high-efficiency communication base station, so as to realize waterproof test

With the improvement of people's living standards and the development of communication technology, mobile communication has become one of the hot spots in the development of communication. The coverage of mobile communication network is increasingly extensive. In the mobile communication network, communication base station is one of its main components. Therefore, communication base station has become a main content of mobile communication network construction, The quality of communication base station will directly affect the quality of mobile network communication. Due to the limitation of the installation conditions of base stations, most of them are in poor conditions. Humidity and dust have become inevitable conditions for base station installation. Therefore, the waterproof and dustproof detection of communication base station is an important link to ensure the quality of mobile network communication. Therefore, it is very important to do a good job in waterproof test of communication base station

In order to ensure the service life of the communication base station, the communication base station needs to be waterproof. It also needs to adapt to different air pressure conditions. Therefore, the communication base station generally has a waterproof vent valve to balance the air pressure. At the same time, the installation position of the waterproof vent valve can also be used to detect the waterproof of the communication base station.

Hiris precision waterproof detector uses compressed air instead of water detection, because water molecules are larger than gas molecules. For the same product, air leakage rate is larger than water leakage rate, so water leakage will cause air leakage, and the detection speed is faster than water. Using the installation hole of the base station waterproof and breathable valve: we will directly pressurize the product and detect the pressure attenuation after stopping pressurization. Then according to the test out of the standard to determine whether the communication base station is waterproof. So as to achieve the purpose of waterproof detection

The operation of hiris waterproof tester is simple without special training. After setting the relevant parameters, the user can get the test data and the alarm of qualified and unqualified indicator lights and buzzers by pressing the run key

The parameters of waterproof detector are as follows:

Air supply pressure: 0.4 ~ 1.2MPa

Power supply voltage: 220 V / 50 Hz or 110 V / 60 Hz

Pressure regulation range: - 40 ~ - 0.5kpa, 5 ~ 150kPa

Pressure regulation accuracy: 0.1kpa

Pressure test range: - 80 ~ 150kPa

The minimum resolution of pressure attenuation test is 1pA

Minimum resolution of leakage flow test: 0.01ml/min

Cases of some customers using air tightness testing equipment

  • Battery sealing test

  • Speaker waterproof level test

  • Waterproof inspection of automobile equipment

  • Mobile IP waterproof detection equipment

  • IP protection level detection of speaker

  • Smart home waterproof detection

  • Sealing test of sailboat battery

  • Waterproof testing equipment for motor protection

Related news
Copyright © 2021 All Rights Reserved Hirays Technology Co.,Ltd. record number:粤ICP备08110193号 本站基于:米拓企业建站系统搭建