National Service Hotline:
Location:Home page > Case Update > Case broadcast >
Leak detection case of motorcycle headlamp waterproof tester IP protection level test

Waterproof performance of motorcycle headlamp is an important standard to measure product quality. becausemotorcycleWhen driving outdoors, it is impossible to avoid rain, damp and wading. Once water enters, it will not only shorten the service life, but also affect the driving line of sight and threaten the safety of usersMotorcycle headlampwaterprooftestingIt's very necessary. To this end, Harris technology has developedMotorcycle headlampwaterprooftestingAnd put into the lamp waterproof detection.

Case study on the application of hiris technology waterproof detector in motorcycle headlamp

How to use Harris air tightness test:

There are two kinds of lamp air tightness detection, one is with inflatable port, the other is completely sealed lamp, which can not inflate the interior; The air tightness tester with high repeatability should be selected for the test. You can consult Shenzhen Harris air tightness tester Co., Ltd;

1. For lamps with gas filling port, we can directly connect the test port of the air tightness tester to the gas filling port of the lamps, and block the other holes with high sealing plug, then inflate, stabilize and test the whole system, read out the data directly through the air tightness tester, and judge the results;

2. For completely sealed lamps, the above method can not be used at all. Then, we can use the air tightness tester in the sealed test mode to put the lamps into a closed chamber. In the first stage, the air tightness tester is filled with a certain pressure of gas to release the gas into the whole system,To determine whether there is a very large leakage of the lamp, we call this process to determine the gross leakage

If there is no gross leakage, enter the second stage, inflate, stabilize and test the whole system, and the equipment will test the result value to determine whether the lamp has leakage and the leakage rate of the lamp;

At present, the requirements of the lighting industry are higher and higher, and more customers require the lighting to meet a certain waterproof level. The traditional water inspection has been completely unable to adapt to the current mass production testing. As the most cost-effective air tightness testing instrument, the air tightness tester is suitable for mass on-line full inspection.

Related news
Copyright © 2021 All Rights Reserved Hirays Technology Co.,Ltd. record number:粤ICP备08110193号 本站基于:米拓企业建站系统搭建