The heat preservation effect of the thermos cup focuses on the sealing of the cup cover. If the cup cover leaks in use, not only the heat preservation effect is poor, but also the phenomenon of water leakage will occur. In order to meet the factory requirements of the cup cover, the manufacturer will carry out the air tightness test. As an expert in the R & D and production of air tightness detector, we have customized air tightness detection solutions for the thermos cup cover produced by huisike. The following is the explanation of the air tightness test scheme for huisike thermos cup cover.
Mold and tooling design
Because there is no inflation port for the cover of the thermos cup, Harris technology needs to customize a special mold for it so as to carry out air tightness test with it. The mold can provide a sealed testing environment for air tightness testing, and play a role in fixing the products to be tested. Tooling is an important part of airtightness detector, which is the inflation part of hiris technology detector.
Harris TechnologyThermos cup coverTooling of air tightness detector3D design drawing
2、 Judgment basis
This tester makes a specific test device for the object to be testedmouldIn the detectioncupCover inmouldTooling of air tightness detectorThe inflation function will be activated for the moldInflate,After voltage stabilizationThe & amp; ldquo; IVT& rdquo; Pneumatic sealing technologytakeAutomatic detection and calculation of heat preservationcupWe can judge the leakage of the cover according to the air leakagecupCover sealing performance, so as to achievecupThe purpose of the cap seal test.
Harris TechnologyThermos cup coverAir tightness tester display
3Thermos cup coverAir tightness detectorIntroduction to other functions
1、The waterproof tester can support leakage test, blocking test, positive pressure test, negative pressure test and other leakage test methods. The test range is wide, and users can choose according to their own test needs.
2Large size touch screen is used as the human-machine interface, which can easily monitor the test results and set various parameters in the process of waterproof test.
3It has the alarm function of qualified and unqualified products, which can eliminate the possibility of manual misjudgment and misinspection.
4, band4Circuit switch input and output8It can accept the control of external sensors and switch buttons, and can control the external relay, solenoid valve and other executive components, so as to realize the full automation of the test conveniently.
5Waterproof testertwo hundredBy setting the parameters of the subprogram on the touch screen, the user can connect different subprograms in series to form a test processI/OThe interface enables the leakage meter to receive control signals from external sensors and control external actuators (relays, solenoid valves, etc.). So as to realize the automation of the test process.
6, with test data recording function, you can download test data toUDisk, and through the computer display.
7With bar code scanning function, it can track and record defective products and repair situation; The function of upper computer.
At present, huisike's orders in hiris Technology Co., LtdThermos cup coverAir tightness detector has been put into production testing, thank youWith the trust and support of huisike, Harris technology will provide customers with the best air tightness detection scheme and equipment.
All the contents of this time are original by Harris technology, reprint and false original are prohibited, and any violation will be responsible for the consequences.